Porcelain Mosaic Catalogue

2017-10-11 DOX 2017-2018 Catalog

 

Ceramic Tile Made from clay feldspar and quartz used to cover walls and floors
Porcelain Tile Water absorption less than 0.5%
Stoneware Tile 0.5%Water Absorption rate≤3%
Glaze The glass layer of glass and crystal to cover or decorate the surface of the billet
Angle Brick Brick consisting of one or more side,used chiefly at opening,corner
Ceramic mosaic Ceramics tile of small size that can be patched together or individually
Backside Pattern Convex and concave groove with a certain shape on the back of ceramic tiles
The front The visible surface the brick body is laid
Backside The surface connected to a wall or ground when laid
Line(Joint Width) The interesting space between rows
Sheet Length Side length of each brick
Dispensing glue Process by which plaster joint are connected between bricks and bricks
Short and length Tolerance range of positive and negative deviations from technical requirements at the same time that the product size of the same bath exceeds the technical requirements.
Waist Contraction The vertical distance between the two side of single brick parallel is less than the vertical distance between the edge of the parallel side and exceeds the range of tolerance required by the technique.
Drum Waist The distance between the two side of single brick parallel is less than the vertical distance between the edge of the parallel side and exceeds the tolerance range required by technique.
Arch and Warp The central part of the front of the product is convex and concave and exceeds the tolerances of the technical requirements.
Size head Tolerance range of the length of parallel of the brick beyond the technical requirements.
Arch and warp The central part of the front of parallel of the brick beyond the technical requirements
Edge curvature The edge of the product is convex or concave and exceeds the tolerances of the technical requirements
Warping One angle of the product deviates from the plane of the other three angles and exceeds the range of tolerances technically required.

 

Advertisements